Deep Grooved Aluminum Dead Shaft Idler Roller For High Speed
Slitting Small Runout
Briefly Introduction
CBB Chuangbo new design new techology aluminum dead shaft idler
roller is made of high quality aluminum alloy materials, and it has
all kinds of modules and sizes with ribs structure and the outside
diameter is from 25mm to 320mm. Under the cheat by computer
balancing correction process, the dynamic balance of the aluminum
roller will be small than 2g. With using of sophisticated equipment
and special tools, the roll surface gloss can be 0.8, concentricity
can reach to 0.02mm. Special cheated in the shaft axle of the
roller, with imported bearings, the aluminum guide roller works
well even at high speed.
Parameters
| Diameter | 22-320mm |
| Length | 100-6000mm |
| Anodize | HV300/HV700 |
| Thickness of anodize | 20-80μm |
| Concentricity | <0.02mm |
| Runout | <0.04mm |
| Type | Hollow / Dead shaft / Live shaft |
| Surface | Plain/ Cross line/ Center line/ Groove line |
| Smoothness | Ra6.3-0.4 |
| Balancing | G6.3/G2.5 |
| Type of roller | Hollow type |
| Dead shaft type |
| Live shaft type |
| Surface treatment | HV300 soft anodize |
| HV700 hard anodize |
| HV700 hard anodize with mirror surface |
| Teflon |
| Surface groove | Plain |
| Cross line |
| Center line |
| Grooved line |
| Anilox line |
| Rolla line |
Features:
1) Wide application
Aluminum Dead Shaft Idler Roller as an independent accessory, can
be designed from 22mm to 320mm, real size is according to clients'
practical need. It can be widely used in slitting, printing,
rewinding, coating, laminating, bag making, paper making
machines,ect.
2) Long use time and easy to maintance
We produce high-quality aluminum dead shaft idler roller, with
required surface treatment, even for screws, we only adopt high
quality aluminum and steel not cheap materials in the market.
3) Light in weight
The weight of the aluminum made roller is very light compared to
steel roller.
Application
Printing
Packaging plastics
Paper
Glass
Pharmaceutical
Electronics batteries
Textile machinery and industries
About CBB Chuangbo:
Ruian Chuangbo Machinery Co., Ltd. established in 1995, is located
in Nanbin Street Industrial Zone, Ruian City, Zhejiang Province,
China
The company is specialized in manufacturing of machinery parts, and
has been granted with independent import and export rights. The
company has strong development strength, advanced technology and
leading manufacturing and testing equipment. Our main products
include aluminum guide roller series, curved roller series, air
expand shaft series, centrifugal fan series, axial fan series,
torque electric motor and controller series, frequency motor
series, magnetic brake / clutch and tension controller serious ,
pneumatic diaphragm pump serious, electric ink pump serious,
low-speed permanent magnet synchronous motor serious and so on.
Widely used in printing, packaging, plastics, pharmaceuticals,
textiles machinery and industries.
